Quality Plastic Film and Plastic Sheets
Are our asymmetric diffuser films suitable for outdoor use? No, not as a first surface. If exposed to the elements, our asymmetric diffuser film will degrade over time. If you need to use this material outside, it must be contained in some-thing else that will keep it from being exposed to excessive UV and moisture.
Is Archival Duralar ™ suitable for outdoor use? No! Over time, UV light will cause the film to turn yellow and become brittle. If you do have a need for some type of material to provide outdoor protection, please contact us to discuss your requirements.
Is acetate suitable for outdoor use? No. We do not recommend using acetate outside, especially for extended durations, be-cause, over time, acetate film tends to swell and shrink with changes in atmospheric humidity. Also, long term exposure to sunlight will eventually cause it to yellow and become brittle. For very short term use (a few … Read more
What is the heat resistance of translucent imaging film (TIF)? TIF is designed to handle the quick heat exposure in a toner-based plain-paper copier/laser printer. Its coatings are designed to be used in environments up to 85C/185F. At higher temperatures, the printable surface could yellow, or lose some of its toner adhesion properties. When TIF … Read more
What is the heat resistance of our surface protection film? These films are designed for use in environments below 65C/140F. At higher temperatures, the adhesive becomes soft and loses adhesion. At really high temperatures (above 140C), the film begins to lose its orientation, becoming wavy and soft. If you need a matte film for higher … Read more
What is the heat resistance of Shrink-Art Films? Well, it’s fairly low, compared with other films like our DuraLar TM films. It’s even a little less heat resistant than our ClearLay TM Rigid PVC and our acetate film. But that’s a good thing! The whole point of Shrink-Art film is to bake it in an … Read more
What is the heat resistance of our pressure sensitive adhesive (PSA) DuraLar TM films? PSA DuraLar is designed for use in environments below 65C/140F. At higher temperatures, the adhesive becomes soft and loses adhesion. At really high temperatures (above 150C), it begins to lose its orientation; it will become wavy and shrink. If you need … Read more
What is the heat resistance of Laser-printable (PPC/Laser) film? PPC/Laser Ffilm is designed to handle the quick high heat exposure in toner-based plain-paper copiers and laser printers. Its coatings are designed to be used in environments up to 85C/185F. At higher temperatures, the printable surface could yellow, or lose some of its toner adhesion properties. … Read more
What is the heat resistance of polyseam? Polyseam will begin to soften at about 150C/300F. When polyseam softens, it begins to lose its orientation; it will become wavy and shrink..
What is the heat resistance of flexible PVC film and sheets? Flexible PVC film starts to soften at 60C/140F. This is due to its plasticizer content. The softer the film, the more plasticizer, the lower temp it melts at. So if your film will only be exposed to a heat environment below 60C/140F, flexible PVC … Read more
